 |
|
|
|
|
|
| Fabrication ribbons |
| |
 |
|
Product form
Fabrics, single or multilayer, can be heat- or ultrasonically-slit into ribbon form.
Heat-slitting produces a melted, closed edge and is possible for all fabrics with the exception of PTFE fabrics. Ribbon width ranges from
7 mm to 2400 mm.
Ultrasonic-slitting produces a closed edge with very little material build-up at the edge.
Ribbon widths ranges from 4 mm to 700 mm. |
| |
 |
|
Make-up
For widths up to 300 mm, ribbons are wound onto polyester discs with an inner square hole
30 x 30 mm and an outer diameter of 61 mm. Upon request ribbons can also be rolled onto ABS rings with an inner diameter of 76 mm (3"). Ribbons which are wider than 300 mm are wound onto polystyrene tubes with an inner diameter of 76 mm (3"). Depending on fabric type and tube dimensions, roll lengths of up to 700 m are possible. |
| |
 |
|
Packaging/labeling
Ribbons are packed into PE bags which are closed by welding. The label contains the following information:
manufacturer, material, dimensions (width in mm, length in m), manufacturing date, order number, roll number.
Ribbons made of SEFAR MEDIFAB fabrics are double bagged. |
| |
| |
|
For a more detailed overview please look under "Additional Information" or contact us. |
| |
|
|
|
|
English
